本公司的纳米钻石涂层钻头和铣刀全部采用进口钨钢材料，硬度在3500度以上，硬度最高可达HV5200，摩擦系数最小可达0.05。选用钻石砂轮经过十几道严格工序精确切削加工成型，全过程由根据显微镜监控。产品精度高，耐磨性好，专业用语精密PCB钻孔开槽的成型生产。
     由于纳米结构涂层的高红硬性使其在极高的热负荷下仍可保持性能稳定，因此纳米钻石涂层刀具比其它类型涂层刀具的加工性能更为优异，尤其在高速切削、干式（或准干式）切削加工条件下更具优势。例如，当以218m/min的切削速度对42CrMoV5钢工件进行精铣加工时，纳米钻石涂层铣刀的使用寿命远远高于TiAlN和AlCrN涂层铣刀（刀具寿命延长40％～60％，而刀具价格降低约40％）。在加工HRC55以上高硬度材料时优势更明显。（在切削速度和进给量相当的情况下，刀具寿命可提高80％～150％）
     纳米结构涂层的高硬度低的摩擦系数，在模具及零配件上面的优势也十分明显，根据乔治费歇尔集团的实验数据，在冲压汽车保险带扣的模具上，纳米 涂层的模具可达到120000件，而AlTiN涂层的只能达到50000件，寿命延长一倍还多，而且加工速度提高30%。
　　The nano diamond coated drill and cutter all imports of tungsten steel material hardness hardness up to more than 3,500 degrees, HV5200 minimum friction coefficient of up to 0.05. Selection of diamond wheel dozen Road strict process of the accurate machining molding, the whole process by monitoring the microscope. High precision, good abrasion resistance, the professional terminology Precision PCB drilling slotted molding production.
     Due to the high red hardness of the nano-structured coating so that it can still maintain stable performance under high heat load, nano-diamond coated tools are superior processing performance than other types of coated tools, especially in high-speed cutting, dry (or quasi-dry type) advantages under cutting conditions. For example, when the fine milling 218m/min cutting speed for 42CrMoV5 steel workpiece, nano-diamond coating cutter life is much higher than TiAlN and AlCrN coated cutters (40% to 60% longer tool life The tool prices reduced by about 40%). More obvious advantages of high hardness material processing HRC55 more. (In the case of considerable cutting speed and feed rate, tool life can be increased by 80% to 150%)
     Low coefficient of friction of the high hardness of the nano-structured coating, in the mold and parts of the above advantages is also very clear, according to the Georg Fischer Group experimental data, in the die of the stamping automobile insurance buckle, the nano-coating the mold may be 120,000 AlTiN coating can only reach 50,000, life expectancy has more than doubled, and the 30% increase in processing speed.